Ambient Weather™ WS-10 Wireless Indoor-Outdoor 8-Channel Thermo-Hygrometer

You can set a high and low temperature and humidity alarm on the Channel 1, Channel 2, Channel 3, and Indoor temperature and humidity.

  1. half bath
  2. outside north end
  3. under home
  4.   IN  

  5. laundry room
  6. bathroom
  7. paint room
Min/Max Alarm Channel
- Adjust +
The default temperature units of measure are degrees Fahrenheit. To toggle between degrees Celsius and degrees Fahrenheit, press and hold the MIN/MAX button for 3 seconds while in normal mode.
To set the alarm, or adjust the high and low alarm settings, press the CHANNEL/+ button until the channel indication arrow points at the selected channel.

With the indicator arrow pointing at the appropriate channel, press and hold the ALARM button for 3 seconds, and the temperature HIGH alarm will flash. Press the CHANNEL/+ button to increase the HIGH alarm and the MIN/MAX/- button to decrease the HIGH alarm. Press and hold the + or - button to change rapidly. While the alarm value is flashing, press and hold the ALARM button for three seconds to toggle the alarm on and off the alarm. The alarm icon ! will appear when set, and disappear when disabled.

Press (do not hold) the ALARM button again to enter the LOW temperature alarm. The LOW alarm for temperature will flash. Press the CHANNEL/+ button to increase the LOW alarm and the MIN/MAX/- button to decrease the LOW alarm. Press and hold the + or - button to change rapidly. While the alarm value is flashing, press and hold the ALARM button for three seconds to toggle the alarm on and off the alarm. The alarm icon ! will appear when set, and disappear when disabled.
?